Adding a Modem
Modems can be setup with their communications settings.
Specify the fields as follows:
| Field | Description |
| Modem Name | This is the name used to identify the modem. |
| Serial Port | This is the serial port that the modem is connected to. |
| Baud Rate | This is the baud rate settings used to communicate with the modem (not the RTU). This is normally set to be as high as possible. |
| Data Bits | These are the number of data bits required to communicate with the modem (not the RTU). This is normally set to "8". |
| Stop Bits | These are the number of stop bits required to communicate with the modem (not the RTU). This is normally set to "1". |
| Parity | This is the parity required to communicate with the modem (not the RTU). It is normally set to "None". |
| Dial Timeout | This is the period of time allowed before the dialling times out. This is entered in seconds. |
To save the modem settings:
- Click the 'Save' button.
To discard changes to the modem settings:
- Click the 'Cancel' button.
Profile™ Configuration Manual