Setting up a Floboss S600

An S600 is highly customizable so Profile™ must retrieve the S600's setup in order to understand how to communicate with it. As the S600's setup is so flexible, a configuration will normally only cover a single S600 with multiple S600s each having their own Profile™ configurations.

Setting up a Floboss S600

To setup a Floboss S600:

  • Click 'Add Configuration' from the configurations screen
  • Enter a 'Configuration Name' to identify the configuration.
  • Select "Daniel Floboss S600" from the 'RTU Type' menu.
  • Choose the type of Floboss from the Config Type menu. This should reflect the ROMs installed in the Floboss.
  • Click the "Next"

Setting up a Floboss S600

Specify the fields as follows:

Field Description
IP Address Enter the IP address of the RTU

To import the configuration:

  • Click "Import"

Setting up an Floboss S600

To add the configuration:

  • Click "Next" to launch your browser and proceed to add sites and RTU's.
  • Or Click "Finish" to return to Profile.

Profile™ Configuration Manual