Setting up an Omni 3000/6000

The configuration of an Omni 3000/6000 is based on the ROM set installed and can therefore be loaded from predefined files. Selecting the config type will automatically select the correct Modbus map to use and will build screens and reports accordingly.

Setting up an Omni 3000/6000

To setup an Omni 3000/6000:

  • Click 'Add Configuration' from the configurations screen
  • Enter a 'Configuration Name' to identify the configuration.
  • Select "Omni 3000" or "Omni 6000" (depending on what you have) from the 'RTU Type' menu.
  • Choose the type of Floboss from the Config Type menu. This should reflect the ROMs installed in the Floboss.
  • Click the "Next" button

Setting up an Omni 3000/6000

On retrieving the config manually, specify the fields as follows:

Field Description
Retrieve Config Specify the config manually
Rom Set Specify the config number i.e. 24

Setting up an Omni 3000/6000Setting up an Omni 3000/6000

On retrieving the config from the flow computer using the TCP protocol, specify the fields as follows:

Field Description
Retrieve Config Have the config retrieved automatically from the flow computer
Protocol Specify the protocol to use for communication with the flow computer
IP Address Specify the IP address of the flow computer
Port Specify the port to use to communicate flow computer

On retrieving the config from the flow computer using the Serial protocol, specify the fields as follows:

Field Description
Retrieve Config Have the config retrieved automatically from the flow computer
Protocol Specify the protocol to use for communication with the flow computer
Serial Port This is the serial port that the RTU will use.
Serial Port Speed This is the baud rate the connection will have.
Data Bits This is the amount of data bits the connection will use. The default is 8.
Stop Bits This is the amount of stop bits the connection will use. The default is 1.
Parity This is the parity that the connection will use. The default is none.

To import the configuration:

  • Click "Import"

Setting up an Omni 3000/6000

To add the configuration:

  • Click "Next" to launch your browser and proceed to add sites and RTU's.
  • Or Click "Finish" to return to Profile.

Profile™ Configuration Manual